VideoSecu Low Profile TV Wall Mount for Most 32″ – 55″ Plasma, LCD, LED, HDTV Flat Panel TV, Universal Wall Mounts Bracket —Compatible with Sony Bravia, Samsung,LG, Haier, Panasonic, Vizio, Sharp AQUOS, Westinghouse, Pioneer, ProScan, RCA, Toshiba MF602B WA8
Posted by HDTV in Electronics May 11th, 2011 | No Comments
This Mount is VideoSecu Wall Bracket for LCD Plasma. Please report to Amazon if you did not see VideoSecu logo on box. This Flat Wall Mount supports most 32″ to 55″ flat panel screen and plasma TVs up to 165 lb weight, please do check TV VESA and weight before placing order. If you are not sure about your TV VESA, please contact us to check. The slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. Safety bolts system-Lift and lock mounting: Just attach the pre-assembled arms on the back of the display to the wall plate, then tighten the security screws lock the display in position as needed.
Cheetah Mounts APDAM2B Plasma LCD Flat Screen TV Articulating Full Motion Dual Arm Wall Mount Bracket for 32 to 55-Inch Displays Up To 165Lbs (Black)
Posted by HDTV in Electronics May 11th, 2011 | No Comments
This is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20″ from the wall yet fold to less than 5″. Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 55″ and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 19″ wide and has wide slots making it easy to mount into standard 16″ studs even if they are not exactly 16″ apart. Thus, the arms may be visible on the sides of 32″ units. The universal design will fit any display with a hole pattern up to 26.3″ wide and 18″ tall. The wall plate is 1/8″ thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. Dual TV locking screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included.
CHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV TILT WALL MOUNT BRACKET FOR 23-37″ TELEVISION BLACK
Posted by HDTV in Electronics May 9th, 2011 | No CommentsCHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV TILT WALL MOUNT BRACKET FOR 23-37″ TELEVISION BLACK
The APTMS tilt mount features a universal design that allows you to mount the vast majority of LED/LCD/Plasma TVs in the 23-37″ size range. Specifically, the APTMS supports hole patterns up to 17.25″ horizontally by 12.25″ vertically and VESA hole patterns up to 400x200mm. The APTMS is designed with a slim 1.9″ profile yet still offers up to 15
Cheetah Mounts APDAM2B Plasma LCD Flat Screen TV Articulating Full Motion Dual Arm Wall Mount Bracket for 32 to 55-Inch Displays Up To 165Lbs (Black)
Posted by HDTV in Electronics May 8th, 2011 | No Comments
This is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20″ from the wall yet fold to less than 5″. Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 55″ and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 19″ wide and has wide slots making it easy to mount into standard 16″ studs even if they are not exactly 16″ apart. Thus, the arms may be visible on the sides of 32″ units. The universal design will fit any display with a hole pattern up to 26.3″ wide and 18″ tall. The wall plate is 1/8″ thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. Dual TV locking screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included.
CHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV TILT WALL MOUNT BRACKET FOR 23-37″ TELEVISION BLACK
Posted by HDTV in Electronics May 7th, 2011 | No CommentsCHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV TILT WALL MOUNT BRACKET FOR 23-37″ TELEVISION BLACK
The APTMS tilt mount features a universal design that allows you to mount the vast majority of LED/LCD/Plasma TVs in the 23-37″ size range. Specifically, the APTMS supports hole patterns up to 17.25″ horizontally by 12.25″ vertically and VESA hole patterns up to 400x200mm. The APTMS is designed with a slim 1.9″ profile yet still offers up to 15
About Me
